Cli Configuration; Get Router Info Ospf; Get Router Info Protocols - Fortinet FortiGate FortiGate-1000 Administration Manual

Router

CLI configuration

get router info ospf

get router info protocols

FortiGate-1000 Administration Guide
3 Specify the network for which to display routes.
4 Specify a gateway to display the routes using that gateway.
5 Select Apply Filter.
Note: You can configure Type, Network, and Gateway filters individually or in any combination.
This guide only covers Command Line Interface (CLI) commands, keywords, or
variables (in bold) that are not represented in the web-based manager. For complete
descriptions and examples of how to use CLI commands see the FortiGate CLI
Reference Guide.
Use this command to display information about OSPF.
Command syntax
get router info ospf {border-routers | database | interface |
neighbor | route | virtual-links}
router info ospf command keywords and variables
Keywords and variables Description
border-routers
database
interface
neighbor
route
virtual-links
Examples
get router info ospf database
get router info ospf interface
Show the current state of active routing protocols.
Command syntax
get router info protocols
Show OSPF routing table entries that have an Area
Border Router (ABR) or Autonomous System
Boundary Router (ASBR) as a destination.
Show the entries in the OSPF routing database.
Show the status of the FortiGate interfaces and
whether OSPF is enabled for each interface.
Show information about OSPF neighbors.
Show the OSPF routing table.
Show information about OSPF virtual links.
01-28006-0009-20041105
CLI configuration
Availability
All models.
All models.
All models.
All models.
All models.
All models.
165