Fortinet FortiGate FortiGate-1000 Administration Manual page 54
Fortinet fortigate fortigate-1000: user guide
Hide thumbs
Also See for FortiGate FortiGate-1000:
- Install manual (66 pages) ,
- Installation manual (56 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
Interface
54
To bring down an interface that is administratively up
You can bring down physical interfaces or VLAN subinterfaces. Bringing down a
physical interface also brings down the VLAN subinterfaces associated with it.
1
Go to System > Network > Interface.
The interface list is displayed.
2
Select Bring Down for the interface that you want to stop.
To start up an interface that is administratively down
You can start up physical interfaces and VLAN subinterfaces. Starting a physical
interface does not start the VLAN subinterfaces added to it.
1
Go to System > Network > Interface.
The interface list is displayed.
2
Select Bring Up for the interface that you want to start.
To add interfaces to a zone
If you have added zones to the FortiGate unit, you can use this procedure to add
interfaces or VLAN subinterfaces to the zone. To add a zone, see
page
58. You cannot add an interface to a zone if you have added firewall policies for
the interface. Delete firewall policies for the interface and then add the interface to the
zone.
1
Go to System > Network > Zone.
2
Choose the zone to add the interface or VLAN subinterface to and select Edit.
3
Select the names of the interfaces or VLAN subinterfaces to add to the zone.
4
Select OK to save the changes.
To add an interface to a virtual domain
If you have added virtual domains to the FortiGate unit, you can use this procedure to
add an interface or VLAN subinterface to a virtual domain. To add a virtual domain,
see
"To add a virtual domain" on page
domain if you have added firewall policies for the interface. Delete firewall policies for
the interface and then add the interface to the virtual domain.
1
Go to System > Network > Interface.
2
Choose the interface or VLAN subinterface to add to a virtual domain and select Edit.
3
From the Virtual Domain list, select the virtual domain that you want to add the
interface to.
4
Select OK to save the changes.
5
Repeat these steps to add more interfaces or VLAN subinterfaces to virtual domains.
To change the static IP address of an interface
You can change the static IP address of any FortiGate interface.
1
Go to System > Network > Interface.
2
Choose an interface and select Edit.
137. You cannot add an interface to a virtual
01-28006-0009-20041105
System network
"To add a zone" on
Fortinet Inc.
Advertisement
Table of Contents
