Advantech ITA-3650E Series User Manual page 45

 Network Stack
Enable/Disable UEFI Network stack. The default setting is [Disabled].
 Ipv4 PXE Support
Enable/Disable IPV4 PXE support. If disabled, IPV4 PXE boot option will not be
created.
 Ipv4 HTTP support
 Ipv6 PXE support
Enable/disable IPV6 PXE support. If disabled, IPV6 PXE boot option will not be
created.
Ipv6 HTTP support

IPSEC certificate

PXE boot wait time

Sets the wait time to press ESC key to abort the PXE boot.
 Media detect count
Set the number of times the presence of media will be checked.
4.2.2.12 CSM Configuration
 CSM Support
Enable/disable CSM support. The default setting is [Enabled].
 GateA20 Active
[Upon Request]: GA20 can be disabled using BIOS services.
[Always]: Do not allow disabling GA20.
 INT19 Trap Response
BIOS reaction on INT19 trapping by option ROM.
[Immediate]: execute the trap right way.
[Postponed]: execute the trap during legacy boot.
Boot option filter

This option controls legacy/UEFI ROMs priority.
 Network
Control the execution of UEFI and legacy PXE OpRom.
 Storage
Control the execution of UEFI and legacy Storage OpRom.
 Video
Control the execution of UEFI and legacy Video OpRom.
33 ITA-3650E Series User Manual