For more information about the supported XENPAK types and specifications, see the Extreme Networks Pluggable
Interface Modules Installation Guide.
10G2X LEDs
The 10G2X module has the following LEDs:
Module status
●
Port status
●
For information about the LEDs and their activity on the 10G2X module, see
page
29.
10G2H Module
Figure 9
shows the 10G2H module.
Figure 9: 10G2H Module
Module status LEDs
10 Gbs ports
RJ-45
connector
ports
Mini-GBIC ports
The 10G2H module has the following:
2 unpopulated XENPAK-based 10 Gigabit Ethernet ports
●
20 10/100/1000BASE-T RJ-45-connector ports
●
20 unpopulated SFP-based Gigabit Ethernet fiber ports
●
The default configuration of the 10G2H module is as follows. All ports:
Are added to the default VLAN as untagged
●
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
●
BlackDiamond 10808 Switch Hardware Installation Guide
EX_116
I/O Modules
"I/O Module LEDs" on
27