BlackDiamond 10808 Series Modules
XENPAK Ports
The 10G2H module supports any of the following XENPAKs:
SR XENPAK
●
LR XENPAK
●
ER XENPAK
●
ZR XENPAK
●
LX4 XENPAK
●
LW XENPAK
●
NOTE
CX4 XENPAKs are also supported with Extreme Networks devices; contact your vendor to obtain these.
For more information about the supported XENPAK types and specifications, see the Extreme Networks Pluggable
Interface Modules Installation Guide.
SFP Ports
The 10G2H module supports any of the following SFPs:
1 Gigabit copper SFP
●
SX SFP, which conforms to the 1000BASE-SX standard
●
LX SFP, which conforms to the 1000BASE-LX standard
●
ZX SFP, which conforms to the IEEE 802.3z standard
●
1000BX SFP (bidirectional SFP), which conforms to the IEEE 802.3ah 1000BASE-BX10 standard
●
NOTE
For more information about the supported mini-GBIC types and specifications, see the Extreme Networks Pluggable
Interface Modules Installation Guide.
10G2H LEDs
The 10G2H module has the following LEDs:
Module status
●
Port status
●
For information about the LEDs and their activity on the 10G2H module, see
page
29.
28
"I/O Module LEDs" on
BlackDiamond 10808 Switch Hardware Installation Guide