Power Supplies For The Blackdiamond 10808 Switch - Extreme Networks BlackDiamond 10808 Hardware Installation Manual

Table 13: BlackDiamond 10808 Switch Technical Specifications (Continued)
Acoustic Sound (BlackDiamond 10808 Switch with AC Power Supplies)
Sound power in accordance with
EN 300 753 (10-1997)
Sound pressure in accordance
with NEBS GR-63 Issue 2

Power Supplies for the BlackDiamond 10808 Switch

Table 14: Specifications for the AC SSI PS Model #60020/PS2336 (700/1200 W AC PSU)
Typical configuration
Full configuration
Input
Output
Power supply cord selection
AC power supply input socket
Minimum wire size
Operating conditions
Table 15: Specifications for the DC SSI PS Model #60021 (1200 W DC PSU)
Typical configuration
Full configuration
BlackDiamond 10808 Switch Hardware Installation Guide
Sound power
Low: 71 dBA per ISO 7779
Normal: 80 dBA per ISO 7779
High: 85 dBA per ISO 7779
Declared sound power
Low: 7.4 belsA per ISO 7779 & ISO 9296
Normal: 8.2 belsA per ISO 7779 & ISO 9296
High: 8.8 belsA per ISO 7779 & ISO 9296
Bystander sound pressure
Low: 65 dBA front side @ 0.6m
Normal: 75 dBA rear side @ 0.6m
High: 81 dBA rear side @ 0.6m
3 power supplies
6 power supplies
Nominal input: 100 to 240 V
AC voltage input range: 90 to 264 V
Maximum input amperages:
7 A @ 200 V (high-line)
10 A @ 90 V (low-line)
AC line frequency: 47 to 63 Hz
PS input socket: IEC 320 C14
Minimum wire size: 16 AWG (1.31mm
DC output: 48 V , 24 A/12 V
48 V , 13.5 A/12 V
DC output power (W): 700 to 1200 W
Refer to "Selecting Power Supply Cords" on page
IEC 320 C14
2
16 AWG (1.0mm ) copper stranded
(pre-approved cord set for county of use)
Operating temperature: 0° C to 40° C
Storage temperature: –40° C to 70° C
Operating humidity: 10% to 90% relative humidity, non-condensing
2
Operational shock: 30 m/s
3 power supplies
6 power supplies
Power Supplies for the BlackDiamond 10808 Switch
, 60/50 Hz, 10 A max
2
) copper stranded
, 4 A (high-line)
, 4 A (low-line)
124.
(3 g)
135