Connecting Cable Clips; Blackdiamond 10808 Switch Hardware Installation Guide - Extreme Networks BlackDiamond 10808 Hardware Installation Manual

BlackDiamond Cable Management
2 Slide the ends together and push the cable holders together until you feel them snap into place (see
Figure 51).
Figure 51: Connected Cable Holders
ENIN004
3 Connect as many cable holders together as you need to manage your cable bundles.
4 To disconnect the holders, grasp one in each hand firmly and carefully pull them apart.

Connecting Cable Clips

To connect the cable clips:
1 Hold two clips next to each other with the split sides facing the same way (see Figure 52).
2 Slide the connecting grooves together (see Figure 52).
Figure 52: Connecting Cable Clips
ENIN001A
102

BlackDiamond 10808 Switch Hardware Installation Guide