Table of Contents
Advertisement
Front panel LEDs
The following diagram illustrates the components on the front panels of the VSP 4450GTX-HT-PWR
+ switch.
For detailed explanations of the states indicated by each front panel LED type, see the following
sections:
•
Switch LED state indicators
•
Port LED state indicators
Figure 6: VSP 4450GTX-HT-PWR+
1. USB 2.0 port
2. Switch LEDs
3. 10/100/1000 Mbps RJ45 ports with PoE+ (LEDs above ports)
4. 100/1000 Mbps Combo SFP slots. Supports 1 Gbps SFPs and 100 Mbps low speed SFPs
5. 1/10 Gbps SFP+ ports
6. Console Port
Warning:
Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look into
an optical fiber or connector port. Always assume that fiber-optic cables are connected to a light
source. For a translation of this statement, see
Switch LED state indicators
The following figure describes the main switch LED state indications provided by LED color and
fluctuation cues.
Note:
Indicator states are applicable to all models of VSP 4000 switches.
Table 15: Switch LED state indicators
Label
Color and Status
PWR
Green (solid)
August 2018
on page 33
on page 34
Description
The switch is receiving power either from the primary or
secondary power supply. Normal operation.
Installing the Virtual Services Platform 4450GTX-HT-PWR+
Translations of safety messages
LED state definitions
on page 39.
Table continues...
33
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeSwitching Virtual Services Platform 4450GTX-HT-PWR+ and is the answer not in the manual?
Questions and answers