Connecting Stacking Cables; Connecting A Summitstack 40G Cable To A Stacking Port - Extreme Networks Summit X150-24t Hardware Installation Manual

Confidential and proprietary information of Extreme Networks. © 2011 Extreme Networks, Inc.

Connecting Stacking Cables

To connect Summit switches in a SummitStack configuration, use the appropriate stacking cables for the
specific stacking ports on the switches. This section provides instructions to connect the following
stacking cables:
SummitStack 40G cable (see
G
SummitStack 128G cable (see
G
SummitStack 128G/20G cable (see
G
SummitStack 128G/64G cable (see
G
SummitStack 64G cable (see
G
SummitStack 64G/20G cable (see
G
QSFP+ direct-attach cable (see
G

Connecting a SummitStack 40G Cable to a Stacking Port

SummitStack 40G cables are used to connect 20-Gbps SummitStack ports on the following
Summit switches:
Summit X250e, X450, X450a, and X450e series switches with integrated SummitStack ports
G
Summit X480 series switches with installed VIM2-SummitStack modules
G
Summit X650 switches with installed VIM1-SummitStack modules
G
To connect a SummitStack 40G stacking cable:
1 Align the cable connector with the stacking port connector on the back of the first switch
(Figure 118).
2 Firmly press the cable connector into place on the mating stacking port connector.
3 Align and tighten the retaining screws on the cable connector.
Repeat steps 1 through 3
Figure 118: Connecting a Summit Stacking Cable
CAUTION
Avoid making sharp bends in the cable. Sharp bends can stress the cable and cause damage.
Summit Family Switches Hardware Installation Guide
All rights reserved. DRAFT. October 20, 2011
page 171)
page 172)
page 174)
page 176)
page 178)
page 179)
page 181)
to connect the cable to the second switch.
ES4K037
171