Connecting Cable Clips - Extreme Networks BlackDiamond 8806 Hardware Installation Manual

2 Slide the ends together and push the cable holders together until you feel them snap into place (see
Figure 112).
Figure 112: Connected Cable Holders
ENIN004
3 Connect as many cable holders together as you need to manage your cable bundles.
4 To disconnect the holders, grasp one in each hand firmly and carefully pull them apart.

Connecting Cable Clips

To connect the cable clips:
1 Hold two clips next to each other with the split sides facing the same way (see Figure 113).
2 Slide the connecting grooves together (see Figure 113).
Figure 113: Connecting Cable Clips
ENIN001A
BlackDiamond 8800 Series Switches Hardware Installation Guide
153