Configuring The V; Iu 6400-S; Connecting To The 6400-S - Polycom V2IU 6400-S User Manual

Configuring the V

Connecting to the 6400-S

Configure the 6400-S using a web browser such as Internet Explorer or
Netscape Navigator. The 6400-S is shipped with a pre-configured IP address
for its Subscriber (Port 1) interface.
This chapter gives you the information you need to get started. It contains the
following sections:
• Connecting to the 6400-S
• Logging In and Out of the 6400-S
• Navigating Through the Configuration Pages
• Read-only User
• Getting Help
You need to connect to the 6400-S before you can configure it to work with
your network. Connect using the supplied preset IP address and subnet
mask. You are also supplied with a default user ID and password.
To connect to the 6400-S:
1. Connect a PC using an IP address of 192.168.1.2 and subnet mask of
255.255.255.0 to Port 1 of the 6400-S.
2. Launch a web browser on the PC and enter the URL string: 192.168.1.1.
2

IU 6400-S

3
3 - 1