Configuring Subscriber Interface Settings - Polycom V2IU 6400-S User Manual

2
User Guide V IU 6400-S Converged Network Appliance

Configuring Subscriber Interface Settings

Note
4 - 2
The subscriber interface defines the interface between the 6400-S and your
customers' endpoints or the public network.
To configure subscriber interface settings:
1. In the navigation bar, select Network.
2. In Subscriber Interface Settings, highlight and replace the default IP
Address and Subnet Mask.
3. If you are configuring network settings, see the instructions in
"Configuring the Network"
4. If you want to configure a management interface that is different than the
default, complete all of the configuration tasks, then see
Management Interface"
5. Press Submit.
After submitting the new configurations, you need to reconnect to the 6400-S using
the new IP address and subnet mask before you can continue with the
configuration.
\
on page 4-9.
on page 7-9.
"Configuring a