Enabling Snmp - Polycom V2IU 6400-S User Manual

Caution

Enabling SNMP

When manually configuring the MTU size we recommend that you use a setting of
800 bytes or greater. You may experience problems with certain types of VoIP
traffic if the MTU size is set below 800 bytes.
To set the Provider MTU size:
1. In the navigation bar, select System.
2. In the System menu, select Set Link.
3. Enter the Provider MTU size.
4. Press Submit.
The 6400-S can be managed remotely by an SNMP network management
system such as HP Openview. The 6400-S supports SNMPv1 and MIB-II
(RFC1213). All MIB-II variables are read only. The MIB variables sysContact
and sysLocation are set by the web GUI.
To enable SNMP:
1. In the Navigation bar, select System.
Administrative Options
7 - 13