Configuring The 4300T - Polycom V2IU 4300T User Manual

Configuring the 4300T

The 4300T is a flexible, easy to use converged network appliance that provides
many critical networking functions for IP based voice, video and data. It can
be installed in several different topologies:
• At the customer premise for IP Centrex and hosted video applications
• At the station side of enterprise IP PBXs
• At the trunk side of enterprise IP PBXs
• At the public/private IP address boundary for enterprise video
applications
Most users will follow the steps provided in the "Configuring The Systems
Settings" section of this manual to initially connect the 4300T into their IP
network. The remainder of the configuration can be different based on the
application, VoIP topology and presence of other networking equipment such
as firewalls or DHCP servers. In general, however, the steps used to configure
the 4300T are:
Step Task
1 System configuration
2 VoIP configuration
3 Data networking configuration
4 Firewall configuration
5 Traffic management configuration
6 VoIP survivability configuration
Some of the steps are optional depending on your particular application. We
have provided configuration guidelines below for each of the application
types supported by the 4300T.
3
3 - 1