Disabling Snmp; Enabling Remote System Logging - Polycom V2IU 6400-S User Manual

Disabling SNMP

Enabling remote system logging

Field
SNMPv3 Security
SNMPv3 Trap Context
System Location
System Contact
SNMP Port
4. Press Submit.
To disable SNMP, select Services Configuration from the System menu and
uncheck the SNMP checkboxes.
The 6400-S can be configured to log system messages to an external syslog
server.
To enable remote system logging:
1. In the Navigation bar, select System.
Description
The SNMPv3 security level for user
authentication and encryption of both
synchronous requests as well as
asynchronous traps. "None" means neither
SNMPv3 authentication or encryption are
used. "Auth(MD5)" means authenticating
user using MD5 hash algorithm.
"AuthPriv(MD5/DES)" means authentication
as well as encryption using the DES
encryption algorithm. The default value is
None.
The SNMPv3 trap context defaults to nothing
but can be set to any string.
A comment string that can be used to
indicate the location of the 6400-S. By
default, no value is set.
The administrative contact information for the
6400-S. By default, no value is set.
The port that the 6400-S monitors to read
and send SNMP data. The default is 161.
Administrative Options
7 - 15