Configuring Provider Interface Settings - Polycom V2IU 6400-S User Manual

Configuring Provider Interface Settings

The provider interface defines the interface between the 6400-S and internal
voice, video and data devices. This interface is generally connected to the pri-
vate network.
To configure provider interface settings:
1. In the navigation bar, select Network
2. In Provider Interface Settings, select Static IP Address (the most common
configuration), or DHCP if a DHCP server assigns the 6400-S internal
address.
3. Enter an IP Address.
4. Enter a Subnet Mask.
5. If you are configuring network settings, see the instructions in
"Configuring the Network"
6. If you want to configure a management interface that is different than the
default, complete all of the configuration tasks, then see
Management Interface"
7. Press Submit.
Configuring Network Settings
on page 4-9.
on page 7-9.
"Configuring a
4 - 3