Routing Information; Link Status; Interface Information - Polycom V2IU 6400-S User Manual

2
User Guide V IU 6400-S Converged Network Appliance
3 - 6
2. In the System menu, select Network Information.
3. Scroll through the Network Information page to view:

— Routing information

— Link status

— Interface information

Routing Information
The system routing table contains the static routes for the hosts and networks
that are on the Provider side of the 6400-S. When the provider and subscriber
settings have been fully configured, there must be at least four routing lines
displaying:
• The private subnet associated with the Provider interface.
• The immediate subnet associated with the Subscriber interface.
• The loopback interface.
• The network's default gateway, this must be the next-hop-router on the
Subscriber side of the 6400-S.
The order of the lines may vary depending on the subnet masks.
Additional lines may be displayed depending on the contents of the Route
and VoIP Subnet Routing pages. Each of the entries on these pages will cause
an additional entry in the routing table.
Link Status
Link Status displays the status of the Ethernet connections. Ethernet auto
negotiation is often unreliable, especially between different vendors or old
and new networking equipment. Failure of auto negotiation is generally not a
cause for concern. However, if the negotiated rates change intermittently, or