Configuring The Network - Polycom V2IU 6400-S User Manual

Configuring the Network

Use network settings to configure the default gateway address, and the pri-
mary and secondary DNS servers.
Packets destined for IP addresses not known to the 6400-S are forwarded to
the Default Gateway for handling. For the 6400-S the Default Gateway MUST
be the next hop router attached to Port 1 (the Subscriber interface).
The primary DNS server is used by the 6400-S to resolve domain names to IP
addresses. The secondary DNS server is used in the event the primary DNS
server is unreachable.
To configure network settings:
1. In the Network page, move to the Network Settings section.
2. Enter an IP address for the Default Gateway
This must be the next-hop-router connected to Port 1, the Subscriber side
interface
3. Enter the Primary DNS Server.
4. Enter the Secondary DNS Server.
5. Press Submit.
Configuring Network Settings
4 - 9