Table of Contents
Advertisement
Running a ping test
Running a traceroute test
The Ping Test is the most common test used to verify basic connectivity to a
networking device. Successful ping test results indicate that both physical and
logical path connections exist between the 6400-S and the test IP address.
Successful ping tests do not guarantee that all data message are allowed
between the 6400-S and the test IP address.
To run a ping test:
In the navigation bar, select System.
In the System menu, select Network Test Tools.
1. Enter an IP Address to Ping.
2. Press Ping.
The Traceroute Test is used to track the progress of a packet through the
network. The test can be used to verify that data destined for a provider device
reaches the remote IP address via the desired path. Similarly, network paths
internal to a company can be traced over the subscriber network to verify the
local network topology.
To run a traceroute test:
1. In the navigation bar, select System.
Administrative Options
7 - 7
Advertisement
Table of Contents
Need help?
Do you have a question about the V2IU 6400-S and is the answer not in the manual?
Questions and answers