Unpacking The Vmc 1000 Appliance; Connecting A Pc To The Vmc 1000 Appliance; Configuring The Vmc 1000 Appliance - Polycom VMC 1000 Getting Started Manual

Video Media Center - VMC 1000 Getting Started Guide

Unpacking the VMC 1000 Appliance

Connecting a PC to the VMC 1000 Appliance

Configuring the VMC 1000 Appliance

4
• Place the VMC 1000 appliance on a stable flat surface in the selected
location.
• Remove the VMC 1000 appliance from its package. You can install it either
in a rack or place it on a flat surface:
— Install the VMC 1000 appliance on a rack using one of two methods:
» Install the brackets supplied by the rack manufacturer on each
side of the rack on which the VMC 1000 appliance is placed.
Secure the system by fastening four screws to the rack on the front
panel.
» Install a shelf supplied by the rack manufacturer on top of which
the VMC 1000 appliance is placed. Secure the system by fastening
four screws to the rack on the front panel.
— Place the VMC 1000 appliance on a secure, flat and clean surface.
This section explains how to connect the VMC 1000 appliance.
To connect the PC to the VMC 1000 appliance:
Turn on the VMC 1000 appliance.
1
Turn on the PC and configure your PC (LAN) with:
2
— Static IP: 192.168.1.10
— Mask: 255.255.255.0
— Gateway: 192.168.1.1
Plug the cross over network cable into the network connection (LAN 1)
3
for the VMC 1000 appliance.
Plug the cross over network cable into the network connection for the PC.
4
To configure the VMC 1000 appliance, you must:
• Get the Product Activation Key.
• Get the VMC 1000 license file.
• Set up the network connection.
• Log into the VMC 1000 Initialization and Licensing UI.
• Edit the network configuration.
Polycom, Inc.