Installation For 8977/8978 Mortise Type - Assa Abloy SARGENT IN120 Wi-Fi Series Installation Instructions Manual

IN120 / IN220 Exit Device
Installation Instructions for Mortise Type 8977/8978 Exit Device
9
1 Door Preparation
A. Verify Hand and Bevel of Door
•
This exit device is handed and is not reversible.
•
B. Verify Product Label
C. Prepare Door
1. If using a mullion, install it prior to installing hardware.
2. Doors should be pre-prepped (recommended).
3. Use appropriate templates:
Note: Instruction examples show wood door installation.
For metal doors, route cables inside door.
Raceway
for Auxiliary
Power
Raceway for
PoE
Trim Lever Hole
ET Through Bolt Hole
*IN220 (PoE) Wiring and Installation See Section 7
1-800-810-WIRE • www.sargentlock.com • A8185D
Check hand of door.
Door should be fitted and hung.
• IN220 template A8215 (Field Prep Template).
• Exit installation instructions A6705.
Through Bolt Holes
Door
Position
Switch
ET Through Bolt Hole
Mortise
Pocket
Fig. 1B
19
Inside
Left Hand
Reverse
LHR
Outside
Fig. 1A
Lever Hole
ET Through Bolt Hole
Right Hand
Reverse
RHR
Raceway
for Auxiliary
Power
Raceway for
PoE