Mortise Type 8977/8978 Exit Device Insallation - Assa Abloy SARGENT IN220 Installation Instructions Manual

Installation Instructions for Mortise Type 8977/8978 Exit Device
8
1 Door Preparation
A. Verify Hand and Bevel of Door
• Check hand of door.
This exit device is handed and is not reversible.
• Door should be fitted and hung.
B. Verify Product Label
C. Door Preparation
1. If using a mullion, install it prior to installing hardware.
2. Doors should be pre-prepped (recommended).
3. Use appropriate templates:
• IN220 template A8215 (Field Prep Template).
• Exit installation instructions A6705.
Note: Instruction examples show wood door installation.
For metal doors, route cables inside door.
Raceway for
PoE
Trim Lever Hole
ET Through Bolt Hole
1-800-810-WIRE • www.sargentlock.com • A8205B
Left Hand
Reverse
LHR
Through Bolt Holes
Door
Position
Switch
ET Through
Bolt Hole
Mortise
Pocket
Fig. 1B
24
IN220 Exit Device
Inside
Right Hand
Reverse
RHR
Outside
Fig. 1A
Raceway for
PoE
Lever Hole
ET Through Bolt Hole