IN120 / IN220 Exit Device
3 Mount Exit Device Chassis
NOTE: Exit chassis harness consists of a 6-pin female connector and two
different-sized ground lugs (Fig. 3A)
1. Feed 6-pin connector and larger ground lug straight through to outside of
door (Fig. 3A, B) while feeding smaller ground lug into wire hole, up through
wire channel and out through inside of door (Fig. 3C).
DO NOT PINCH THE WIRE HARNESS.
2. Begin to secure the exit chassis with through bolts
to the ET trim using (2) 1/4 -20 x 2-3/8"
flat head machine screws.
1-800-810-WIRE • www.sargentlock.com • A8185D
Inside of Door
Fig. 3A
Exit Chassis
Outside of
Door
Fig. 3B
Inside of Door
(2) 1/4 x 2-3/8"
Flathead Machine
Screws (secures ET)
Fig. 3C
15