Multi-Point Lock
FM7300 Series and BL7300 Series
Installation Instructions
5
Addendum (cont .)
m
Mortise Reinforcer and Mortise Lock Installation
• Remove the two (2) #12-24x1" flat head LBC mounting screws that are securing the lockbody case in
the door. (Figure 52)
• Place mortise reinforcer into the door.
• Reinstall two (2) #12-24x1" flat head LBC mounting screws
(DO NOT FORCE).
• Install two (2) #12x1/4" self tapping screws
through mortise reinforcer into the face of the door.
(Figure 53)
Note:
Reinforcer lip
belongs on the side
of the door that has
a special cutout at
the door edge.
n
Final Installation
Refer to Section 3 "Installation" on page 6
1-800-727-5477 • www.sargentlock.com
Copyright © 2017, 2019, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole
or in part without the express written permission of SARGENT Manufacturing Company is prohibited.
Figure 53
23
Figure 52
A8220D 10/19