Assa Abloy SARGENT IN120 Wi-Fi Series Installation Instructions Manual page 14

2 Install Door Position Switch (DPS)
Wood doors have 3/8" raceway to controller cutout and metal doors have 3/4" raceway to
the controller cutout.
Refer to template A8214.
1. Insert connector end of DPS through the raceway on the latch edge of the door (Fig. 2A).
Note: For metal doors, use DPS Collar.
2. Push DPS firmly into place by hand.
: DO NOT TAP SWITCH WITH ANY TOOL.
IMPORTANT
DPS
(Door Position
Switch)
Collar is used only
with metal doors
Fig. 2A
Wood Frame Metal Frame
Dim 1
3/8" 3/4"
14
IN120 / IN220 Exit Device
DPS
(Door Position
Switch)
Door Frame
Dim 1
Dim 2
(From template)
Horizontal
of Strike
1-800-810-WIRE • www.sargentlock.com • A8185D
Door Position
Switch Hole
Vertical
of Strike
Fig. 2B