ED5000N Series Exit Devices For
9700 TCPIP1 & PWI1 Series Trim
1.
Verify Hand and Bevel of door:
Door should be fitted and hung.
Verify box label for size of exit device,
function and hand.
2.
Prep door according to supplied Door Marker (FM410).
For door manufacturer templates visit www.corbinrusswin.com and reference
template #'s T31169 & T31170.
Raceway for
PoE harness
Wire Harness Cutout
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
6) Mortise Exit Installation Instructions
Outside of Door
Wood Door Preparation
Through-bolt Holes
Door Position Switch
(DPS) Raceway
Through-bolt Holes
9
Left Hand
Reverse
LHR
Inside of Door
Fig. 2
Inside
Right Hand
Reverse
RHR
Outside
Fig. 1
Raceway for
PoE harness
Wire Harness Cutout
Wire Hole
Trim Tailpiece
Hole