Installation For 8877/8878 Rim Exit - Assa Abloy SARGENT IN120 Wi-Fi Series Installation Instructions Manual

IN120 / IN220 Exit Device
Installation Instructions for 8877/8878 Rim Exit
8
1 Prepare Door
A. Verify Hand and Bevel of Door
• Check hand of door.
The exit device is non-handed and
the trim is field reversible.
• Door should be fitted and hung.
B. Verify Product Label
C. Door Preparation
Prior to installation, all holes must be free of burrs, debris and sharp edges.
Prepare door according to appropriate template (see website ).
Field Template: A8149 (ships with product)
Door Manufacturer's Template: 4712
Raceway
for Auxiliary
Power
Raceway for
PoE*
Through Bolt Holes
Cylinder Hole
Trim Lever Hole
ET Through Bolt Hole
1-800-810-WIRE • www.sargentlock.com • A8185D
Outside
of Door
Fig. 1B Wood Door Preparation
*IN220 (PoE) Wiring and Installation See Section 7
Left Hand
Reverse
LHR
Inside
of Door
Through Bolt Holes
Door
Position
Switch
ET Through Bolt Hole
Fig. 1B
13
Inside
Right Hand
Reverse
RHR
Outside
Fig. 1A
Raceway
for Auxiliary
Power
Raceway
for PoE*
Wire Run Channel
(Wood Door)
Cylinder Hole
Lever Hole
ET Through Bolt Hole