Assa Abloy SARGENT IN120 Wi-Fi Series Installation Instructions Manual page 23

IN120 / IN220 Exit Device
5 Install Cylinder
For devices without cylinder, go to Step 6.
1. While installing the rim cylinder, support the tail piece of the cylinder,
verifying its engagement with the top hub of the exit chassis.
Note: Be sure ET harness is clear of cylinder and tailpiece.
2. Secure the cylinder by through-bolting the cylinder
through the exit chassis using (2) #12-24 x 1-7/8"
connecting screws (see Fig. 6).
3. Verify that the key retracts latchbolt.
6 Secure Exit Chassis
To comply with UL certifications and for security:
Fasten exit chassis to door using (4) #10 wood
screws (for wood door) or (4) #10-24 machine
screws (for metal door).
1-800-810-WIRE • www.sargentlock.com • A8185D
Position cylinder so that the SARGENT logo is right-side up
Correct Incorrect
Fig. 5A
Fig. 6
23
Fig. 5B
Inside of Door
(4) #10 Wood Screws or
#10-24 Machine Screws
(2) #12-24 x 1-7/8"
Flat Head Screws
(Through-bolts
Cylinder to Chassis)