quadient iX-7 User Manual page 67

Press
1.
Make sure the labels are available in the label dispenser (see
Dispenser
Press
2.
3
In optional mode Differential weighing (
From the home screen:
1. Place the stack of mail you want to process on the weighing platform, and then
follow the instructions on the screen or the steps below.
2. Remove the first mail piece from the top of the stack. The Mailing System displays
weight and postage on the home screen and starts motors automatically.
3. To print the imprint, insert the mail piece into the base against the rear-guide wall,
side to be printed facing upwards.
If mail piece is bigger than mail path maximum thickness (see
on page 367), press
at once.
4. The Mailing System applies postage and the mail piece (or label) is sent to the
catch tray.
62
and enter the number of labels.
on page 101).
to print the labels.
before you press
When using sealer, collect the mail piece stack in the catch tray
and put stack aside to let envelopes dry.
)
to print a label. The label is printed
Filling the Label
Mail Specifications