Table of Contents
Advertisement
4.
Lift the metal retainer to remove the sponge.
Remember its direction.
5.
Clean the sponge and the brush.
6.
Re-install the sponge and retainer.
7.
Put the brush back and push the release lever back down until it snaps into place.
8.
Push down on the upper drive assembly until it locks back into position.
13
The Weighing Device does not Weigh Properly
If the Base does not display a correct weight, complete the following actions to correct
the problem.
You have to check the weighing device (Weighing Platform or Dynamic Scale) as
follows.
Possible causes
354
Display _g indicates a weighing error. When this weighing error
occurs on the home screen, the Standard Weighing type is
automatically selected if the Automatic Weight Detection is
activated, see
How to Activate/Deactive the Automatic Weight
Detection on the WP
Actions
on page 256.
- Quick Links:
- System Layout
- Control Panel Features
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the iX-7 and is the answer not in the manual?
Questions and answers