How To Set [Pass Through] Mail Processing - quadient iX-7 User Manual

Press
1.
2. Insert the mail piece into the mail path against the rear-guide wall, side to be
printed facing upwards.
3
The Mailing System applies the imprint and the mail piece is sent to the catch tray.

How to Set [Pass Through] Mail processing

This section describes how to use the [Pass Through] type of imprint, for:
• Sealing envelopes using the auto-feeder sealer (if installed).
• Only conveying mail, for counting or testing purposes.
Main setting:
56
. System motors start running.