Table of Contents
Advertisement
Mainboard User's Manual
6.4. ATA66/100 Controller Options
When using the ATA66/100 controller, the BIOS setting allows users
to Set Device Mode and Select Boot Sequence.
Setting Device Mode: Choose UDMA (0~4), PIO (0~4), and MW
DMA (0~2) setting options transfer mode for any hard disks
(ATA66/100) controlled by VT82C686A/686B.
Select Boot Sequence: This option allows users to choose the boot
sequence for the hard disk(s). (No options will be shown if there is a
bootable disk on default IDE channels.)
6.5. VIA AC 97 Audio Codec
This folder has software and drivers for the VIA codec sound system
that is integrated on this mainboard. The VIA codec allows the sys-
tem to generate optimal sound effects. Drivers are provided for DOS
and Windows NT/2000/98/95.
Windows Installation
Use the SETUP.EXE application in the \DRIVER\VIA\AUDIO\
folder.
DOS Installation
Browse
INSTALL.EXE.
92
to
the
\DRIVER\VIA\AUDIO\DOS
folder and
ATA66/100 Controller Options
run
Advertisement
Table of Contents
