Table of Contents
Advertisement
Mainboard User's Manual
3.5.6.
An IDE drive ribbon cable has two connectors to support four IDE
drives. If a ribbon cable connects to two IDE drives at the same time,
one of them has to be configured as Master and the other has to be
configured as Slave by setting the drive select jumpers on the drive.
Consult the documentation that came with your IDE drive for details
on jumper locations and settings. You must orient the cable connec-
tor so that the pin 1 (color) edge of the cable corresponds to pin 1 of
the I/O port connector.
3.5.7. Back Panel Connectors
The back panel provides external access to PS/2 style keyboard and
mouse connectors, serial ports, a VGA port, a parallel port, dual USB
ports, a game port and audio ports which are integrated on the main-
board. The figures below show the location of the back panel I/O
connectors.
The VGA port is only available in mainboards that have the
KM133/KM133A/KL133/KL133A chipset.
20
IDE Connectors
IDE Connectors
Pin 1
Pin 1
Attaching Connectors
Advertisement
Table of Contents
