Table of Contents
Advertisement
Mainboard User's Manual
Wake Up Events: This item opens a submenu that enables you to set
events that will resume the system from a power saving mode. Select
Wake Up Events and press <Enter> to display the following menu:
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
VGA
LPT & COM
HDD & FDD
PCI Master
Resume by Ring
Resume by Alarm
x
Date (of Month)
x
Resume Time (hh:mm:ss)
Primary INTR
IRQs Activity Monitoring
← : Move Enter : Select
↑ ↑ ↓ ↓ →
→ ←
F5:Previous Values
VGA: When set to On, the system power will resume the system
from a power saving mode if there is any VGA activity. Default is
Off.
LPT & COM: When this item is enabled, the system will restart the
power-saving timeout counters when any activity is detected on the
serial ports, or the parallel port. Default is LPT/COM.
HDD & FDD: When set to On, any activity from one of the listed
system peripheral devices wakes up the system.
PCI Master: When set to On, any activity from one of the listed de-
vices wakes up the system.
Resume by Ring: When set to Enabled, any activity on the Modem
port will wake up the system from a power saving mode. The options
are Enabled and Disabled (default).
Resume by Alarm: when set to Enabled, you may set the date (day
of the month), hour, minute and second to turn on your system. When
set to set 0 (zero) for the day of the month, the alarm will power on
your system every day at the specified time.
52
Wake Up Events
[OFF]
[LPT/COM]
[ON]
[OFF]
[Disabled]
[Disabled]
0
0 0 15
[ON]
[Press Enter]
+/-/PU/PD:Value:
F10: Save ESC: Exit
F6:Fail-Safe Defaults
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults
Power Management Setup
Advertisement
Table of Contents
