Table of Contents
Advertisement
5.7. PnP/PCI Configurations
Both the ISA and PCI buses on the Mainboard use system IRQs (In-
terrupt ReQuests) and DMAs (Direct Memory Access). You must set
up the IRQ and DMA assignments correctly through the PnP/PCI
Configurations utility; otherwise, the mainboard will not work prop-
erly.
Selecting PnP/PCI Configurations on the main program screen dis-
plays this menu:
CMOS Setup Utility – Copyr ight (C) 1984 – 2000 Award Software
PNP OS Installed
Reset Configuration Data [Disabled]
Resources Controlled by [Auto<ESCD>]
X
IRQ Resources
X
DMA Resources
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
← : Move Enter : Select
↑ ↑ ↓ ↓ →
→ ←
F5:Previous Values
PnP OS Installed: Setting this option to Yes allows the PnP OS (in-
stead of BIOS) to assign the system resources such as IRQ and I/O
address to the ISA PnP device. The default setting is No.
PnP/PCI Configurations
PnP/PCI Configurations
[No]
[Press Enter]
[Press Enter]
[Disabled]
[Enabled]
[Enabled]
+/-/PU/PD:Value:
F6:Fail-Safe Defaults
Figure 4 -15: PNP/PCI configuration
KM/KL Mainboard BIOS
Item Help
Menu Level
Select Yes if you are
using a Plug and Play
capable operating
system Select No if
you need the BIOS to
configure non-boot
devices
F10: Save ESC: Exit
F7:Optimized Defaults
F1:General Help
83
Advertisement
Table of Contents
