Table of Contents
Advertisement
Primary INTR: This item opens a submenu that enables you to set
IRQs that will resume the system from a power saving mode. Select
IRQs Activity Monitoring and press <Enter> to display the following
menu:
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
IRQ 3
(COM2)
IRQ 4
(COM1)
IRQ 5
(LPT2)
IRQ 6
(Floppy Disk)
IRQ 7
(LPT1)
IRQ 8
(RTC Alarm)
IRQ 9
(IRQ2 Redir)
IRQ 10
(Reserved)
IRQ 11
(Reserved)
IRQ 12
(PS/2 Mouse)
IRQ 13
(Coprocessor)
IRQ 14
(Hard Disk)
IRQ 15
(Reserved)
← : MoveEnter : Select
↑ ↑ ↓ ↓ →
→ ←
Help
F5:Previous Values
Set Primary INTR to ON to allow you to enable or disable IRQ 3
through IRQ 15 activity mo nitoring. Set it to OFF to disable IRQ
activity monitoring.
Set any IRQ to Enabled to allow activity at the IRQ to wake up the
system from a power saving mode.
Press the <ESC> key to go back to the main program screen after you
have made your selections in the Power Management Setup screen.
Power Management Setup
IRQs Activity Monitoring
[Enabled ]
[Enabled]
[Enabled
[Enabled
[Enabled
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled
[Enabled
[Enabled
[Disabled]
+/-/PU/PD:Value: F10: Save ESC: Exit F1:General
F6:Fail-Safe Defaults
KT Mainboard BIOS
Item Help
Menu Level
F7:Optimized Defaults
53
Advertisement
Table of Contents
