Add-In Card Options - VIA Technologies VT82C686A User Manual

Mainboard User's Manual
5. Secure the bracket of the card into the expansion slot in the
system chassis using the screw that held the blanking plate in
place.

Add-In Card Options

This mainboard has a Wake On LAN and a Wake On Modem
connectors that can be used by an installed network adapter and an
installed modem adapter. It also has a SB-Link connector that can
be used by an installed PCI Sound Blaster audio card.
Wake On LAN (WOL)
You can configure your system so that it powers down by software
and can be resumed by alarms. If you have installed a LAN adapter
expansion card, connect the card to the Wake On LAN header
WOL1. This allows incoming traffic to resume the system from a
software power down. You need to enable this feature in the
system setup utility.
Wake On Modem (WOM)
If you have installed a fax/modem card, connect the fax/modem to
the Wake On Modem header WOM1. You can then use the setup
utility to program your computer to resume from a power saving
mode whenever there is an incoming call to the fax/modem.
20
WOM1 WOL1
Header Header