Table of Contents
Advertisement
Mainboard User's Manual
ACPI Suspend Type: Use this item to define how your system sus-
pends. In the default, S1(POS), the suspend mode is equivalent to a
software power down. If you select S3 (STR), the suspend mode is a
suspend to RAM – the system shuts down with the exception of a re-
fresh current to the system memory.
PM Control by APM: This field allows you to control the PC Moni-
tor's power management features via Intel-Microsoft Advanced
Power Management software. Once you have enabled the APM inter-
face, some settings made in the BIOS Setup program may be
overridden by APM. The default is Yes.
Video Off Option
when the system is put into suspend mode. The default is Suspend --
> Off.
Video Off Method: This setting controls the video off method in
power saving mode. The default setting is V/H SYNC+Blank which
disables V/H SYNC signals and blanks the screen. Other options are
DPMS and Blank Screen. The DPMS option allows the BIOS to con-
trol the video card if it has the DPMS (Display Power Management
System) feature. The Blank Screen option is used when you do not
have a Green monitor.
MODEM Use IRQ: If you want an incoming call on a modem to
automatically resume the system from a power-saving mode, use this
item to specify the interrupt request line (IRQ) that is used by the
modem. You might have to connect the fax/modem to the mainboard
Wake On Modem connector for this feature to work. The default is 3.
Soft-Off by PWRBTN: When set to Instant-Off (default), pressing
the power button will turn off the system power. When set to Delay 4
Sec. you have to press the power button and hold it for more than 4
seconds to turn off the system power. Otherwise, the system just goes
into suspend mode. The options are Instant-Off and Delay 4 Sec.
State After Power Failure: This sets the power state after a power
failure. If the value is set to ON, the system turns back on. If the
value is set to OFF, the system remains turned off. If the value is set
to Auto, (default) the system returns to the last power state.
80
This option defines if the video is powered down
:
Power Management Setup
Advertisement
Table of Contents
