VIA Technologies A7F129 Manual page 54

Mainboard User's Manual
SB I/O Base Address: This item lets you set the I/O base address for
the Sound Blaster card. There are four options:
•
•
•
•
SB IRQ Select: This item lets you set the Interrupt Request (IRQ)
for the Sound Blaster card. There are four options:
•
•
•
•
SB DMA Select: This item lets you select the DMA for the Sound
Blaster card. There are four options:
•
•
•
•
MPU-401: Use this item to enable or disable the MPU-401 function
for the game port. The default is Enabled.
MPU-401 I/O Address: Use this item to set the I/O address for the
game port. There are four options:
•
•
•
•
Note: To use the MPU-401 standard on the game port you need
to use a MIDI adapter.
Game Port (200-207H): This item shows the I/O address for the
game port.
If you make any changes to the onboard FDD controller, serial ports
or parallel ports in this setup, save the changes and turn off the sys-
tem. After powering up the system, ensure that the changes have
taken effect.
48
220H (default)
240H
260H
280H
IRQ 5 (default)
IRQ 7
IRQ 9
IRQ 10
DMA 0
DMA 1 (default)
DMA 2
DMA 3
300-303H
310-313H
320-323H
330-333H (default)
Integrated Peripherals