Load Fail-Safe Defaults Option; Load Optimized Defaults Option - VIA Technologies A7F129 Manual

Clock By Slight Adjust: Enables you to set the CPU Bus clock
(CPU Frequency) manually from 100 MHz to 166 MHz.
After you have made your selections in the Frequency/Voltage Con-
trol Setup, press the <ESC> key to go back to the main program
screen.
5.10.

Load Fail-Safe Defaults Option

This option opens a dialog box that lets you install fail-safe defaults
for all appropriate items in the whole setup utility.
Use this option if you have changed your system and it does not op-
erate correctly or does not power up. When you select Load Fail-Safe
Defaults from the main menu, you see the following screen:
Press the Y key and then [Enter] to install the defaults. Press the N
key and then [Enter] to return to the previous screen without install-
ing the defaults. The fail-safe defaults place no great demands on the
system and are generally stable. If your system is not functioning
correctly, try installing the fail-safe defaults as a first step in getting
your system working properly again. If you only want to install fail-
safe defaults for a specific option, select and display that option, and
then press the F6 key.
5.11.

Load Optimized Defaults Option

This option opens a dialog box that lets you install optimized defaults
for all appropriate items in the whole Setup Utility. Press the <Y>
key and then <Enter> to install the defaults. Press the <N> key and
then <Enter> to not install the defaults. The optimized defaults place
demands on the system that may be greater than the performance
level of the components, such as the CPU and the memory. You can
cause fatal errors or instability if you install the optimized defaults
when your hardware does not support them. If you only want to in-
stall setup defaults for a specific option, select and display that
option, and then press the <F7> key.
Load Fail-Safe Defaults Option
Load Fail-Safe Defaults (Y/N)? N
KM/KL Mainboard BIOS
87