5
The device works with RF Cards while it does not wor
k with keypad.
5.1
Please check if the keypad is set to "NOT USE".
The default for the keypad input is "NOT USE".
1. See
[12 Setting
to "USE".
If the problem persists, please contact service center.
6
A buzzer keeps making sounds. "Bee~ Bee~ Bee~"
6.1
Please check if the door is closed well.
If a door remains open longer than the preset time, "Door open alarm" goes off. Close the d
oor.
If the problem persists, please contact service center.
7
A buzzer keeps making sounds. "Bee~~~~~"
7.1
Check if the tamper switch is pressed well.
The device has a tamper switch on the back to check if the device is fixed on the wall we
●
ll.
The tamper switch should be being pressed when and after the installation. If the switch
●
is not pressed, tamper alarm is activated and the buzzer sounds an alarm.
A buzzer keeps making sounds. "Bee~~~~~"
Changes] >
[1 F1 SETUP
MENU] >
[1.5 Reader #1 KEY
Input] and set it
p.91