Example No. 1: Ordered Recovery On - CUMMINS ALLISON JetScan iFX i100 Operating Instructions Manual

Example No. 1: Ordered Recovery ON

These screens only appear on machines with:
The check capture option.
•
ORDERED RECOVERY ON in
•
BANK AND PRESENT ON in CHECK SETUP MENU 2.
•
ACCEPT DOUBLES ON in CHECK SETUP MENU 2.
•
Condition
The MISS-FEED DETECTED
screen appears when BANK
AND PRESENT is ON and any
error that requires checks to
be reprocessed occurs.
The PIGGYBACK DETECTED
screen is shown at right as
an example of error
processing when ORDERED
RECOVERY is ON. Detailed
instructions appear on the
screen to guide users through
the check order integrity
process so that the original
item order is maintained.
To clear a MISS-FEED DETECTED screen when ORDERED RECOVERY is ON, follow
these procedures:
1. Empty the pocket as instructed on the screen. Remove checks from the
pocket and bank them.
2. The machine feeds the error into the pocket.
3. The screen displays the type of miss-feed that was detected. A PIGGYBACK
DETECTED screen is shown in this example.
4. Examine the piggyback document and do one of the following:
• Since the ACCEPT DOUBLES option is ON, the screen provides the option
to accept a piggyback document, add it to the total, and continue. If the
document is a thicker check, such as a rebate check, press ACCEPT to
continue processing the checks.
• If the error was caused by a true piggyback, where two or more checks
were overlapping during processing, press REJECT.
© 2013 Cummins-Allison Corp.
CHECK SETUP MENU
Action
2.
109