CUMMINS ALLISON JetScan iFX i100 Operating Instructions Manual page 66

64
Setup Main Menu 1 Key
COMMUNICATIONS
(Continued)
2. Use the  or  keys to select a category.
3. Use the  or  keys to select a setting for each category.
Set PORT NAME, FUNCTION, BAUD RATE, DATA BITS, PARITY and
FLOW CONTROL to meet the requirements of external devices. Contact
a Cummins Allison representative for information on appropriate
settings.
The following FUNCTION settings are available:
• GENERIC PRINTER.
• BAR CODE.
• S280 PRINTER.
• CISS (Cummins Allison Information Settlement System).
• CISS+ATRB.
• CISS+VERID.
• CISS+ST (Cummins Allison Information Settlement System with
Status).
• CISS+ST 4062 (emulates CISS+ST data stream from traditional
®
JetScan models).
• CRM (Cash Room Manager).
• JETTOUCH (JetTouch
JetTouch workstation.
• COMP1 (computer).
• JETSORT.
• WEDGE and WEDGE2 (JetWedge hardware or software).
• REMOTE DISPLAY.
When connecting a printer using the Cummins Allison approved cable,
FLOW CONTROL must be set to RTS/CTS.
If EXIT is pressed before SAVE, settings are not
retained.
4. Press SAVE to retain settings.
5. Press EXIT to return to the SELECT DEVICE TO CONFIGURE screen.
JetScan iFX ® i100 Scanner
Description
®
software). Select to communicate with the
All Models