Stopping Conditions And Recovery Steps - CUMMINS ALLISON Universal JetScan 4161 User Manual

14

Stopping Conditions and Recovery Steps

Screens are listed alphabetically.
Condition
Universal JetScan may have
processed two or more notes as
one.
Condition
Universal JetScan has identified
a note that is different than
those it has been processing
while using sort modes.
This first note of the different
denomination is the top note
in the stacker.
Condition
Universal JetScan may have
processed two or more notes as
one.
Single-Pocket Universal JetScan
Denomination
CHAIN DETECTED
Mode
Remove all notes from the stacker and place them on the hopper. Press
Start. If an alarm repeatedly occurs, adjust the gray thickness dial located
on top of the machine behind the hopper extension. Rotate in the negative
(-) direction as indicated by the numbers on the front of the thickness dial.
Denomination
DENOMINATION CHANGE
Mode
Remove all notes from the stacker. Separate the top note from the
remaining notes. Put the top note in the location for its denomination. Put
all the other notes (they are all the same) in the location for their
denomination.
Universal JetScan automatically will restart.
Denomination
DOUBLE DETECTED
Mode
Remove all notes from the stacker and put them on the hopper. Press Start.
If an alarm repeatedly occurs, adjust the gray thickness dial on top of the
machine behind the hopper extension. Rotate in the negative (-) direction as
indicated by the numbers on the front of the thickness dial.
Sub Total Batch Count
Total Batch Limit
Action
Sub Total Batch Count
Total Batch Limit
Action
Sub Total Batch Count
Total Batch Limit
Action
® Note Scanner
This screen could
show any of these
messages:
• CHAIN DETECTED
• CHAIN DETECTED*
All Models