CUMMINS ALLISON JetScan iFX i100 Operating Instructions Manual page 25

Report Menu Key
DAY REPORT
(Continued)
BATCH REPORT
2. Do one of the following:
• Press OK to clear all day totals to 0 and return to the DAY TOTALS
screen.
• Press CANCEL to return to the DAY TOTALS screen without
clearing totals.
Prompts the BATCH TOTALS screen shown below.
The DENOM column lists denominations. The TICKET line appears if the
machine is set to process tickets. The CHECK line appears if the machine is
set to process checks. The COUNT line appears if the machine is set for
COUNT mode. Use the arrow keys to view additional documents.
The UNIT column shows current piece counts. The VALUE column shows the
current total value by denomination and the grand total.
When a printer is connected, pressing PRINT generates the batch report.
When the ADD key is ON and a batch is suspected of being incorrect, press
CLEAR to clear the active batch total along with the associated strap count
and day total.
Press EXIT to return to the REPORT MENU screen.
To end a batch:
Totals on the BATCH TOTALS screen clear to 0 and
cannot be recovered when a new batch is
processed. Strap counts are not cleared unless
STRAPS CLEAR is set to ENDBT in SETUP.
1. Press END once on the main screen.
BATCH REPORT may be used to view or print totals
after the batch total is cleared to 0 on the main
screen.
If a printer is connected or a communication port is
being used to send data to a PC, a batch report is
generated automatically when the batch is ended.
© 2013 Cummins-Allison Corp.
Description
23