CUMMINS ALLISON JetScan iFX i100 Operating Instructions Manual page 27

Report Menu Key
SUB-BATCH REPRT
(Continued)
2. Press END on the main screen.
When SBAT ENABLE is ON and set to CLEAR in
SETUP, the sub-batch ends and the total on the main
screen resets to 0 when documents are removed
from the pocket.
SUB-BATCH REPRT may be used to view or print
totals after the sub-batch total is cleared to 0 on the
main screen.
When the current sub-batch total is suspected of being incorrect, it can be
cleared and removed from the machine's totals.
To clear the current sub-batch total:
When SBAT ENABLE is ON in SETUP, the CLEAR
key appears on the main screen.
The following steps MUST be performed prior
to pressing END to end a batch.
1. After documents have been processed and before pressing END to end
a batch, press CLEAR to prompt a screen requesting confirmation, as
shown below.
2. Do one of the following:
• Press OK to delete the sub-batch total and return to the main
screen.
• Press CANCEL to return to the main screen without clearing totals.
© 2013 Cummins-Allison Corp.
Description
25