Strap Counts And Strap Limits; How To Set Strap Limits - CUMMINS ALLISON JetScan iFX i100 Operating Instructions Manual

18

Strap Counts and Strap Limits

To view current strap limits and counts, press STRAP on the main screen. The STRAP-
SETTINGS screen is displayed. Configuring the machine's software features can impact the
screen's appearance. Examples are shown below.
Note Processing Enabled
Strap limits may be set for denominations and documents in all operating modes, except for
MIXED, MIXED/FACE or MIXED/ORIENTATION. A strap limit may be set for any piece
count.
Denominations and document types are itemized in the DENOM column. The TICKET row
refers to the ticket count and appears when the machine is set to count tickets only. The COUNT
and CHECK rows refer to the non-value piece count and appear while using COUNT mode or
processing checks.
The UNIT column indicates the current strap count. The LIMIT column indicates the current
strap limit.

How to Set Strap Limits

To set a strap limit:
1. Press  or  to scroll through the denominations and document types. Stop on the desired
document.
2. Enter a strap limit by doing one of the following options:
Press LIMIT to scroll through the preset strap limits. There are seven preset strap limits:
•
10, 25, 40, 50, 75, 100 and infinite (INF). Stop on the desired setting.
Use the numeric keypad to enter the strap limit or press 0 for infinite. To delete one
•
character from the right, press .
3. Do one of the following:
Press ALL to set all denominations and documents at this strap limit.
•
Press  or  to select to the next desired document and repeat step 2 to set the strap
•
limit.
4. When configuration is complete, press EXIT to return to the main screen.
JetScan iFX ® i100 Scanner
Check and Ticket Processing Enabled
All Models