CUMMINS ALLISON JetScan iFX i100 Operating Instructions Manual page 14

12
Main Screen Key
CHECK
CRNCY
CLEAR
UNIT
S/N
STRAP
CONT
Press to process MICR-encoded documents. When multiple document types are
activated, press CRNCY to prompt the SELECT NEW CURRENCY screen and press
the CHECK key.
Press to prompt the SELECT NEW CURRENCY screen which is used activate the
preferred currency, checks or bar-coded tickets for processing. At this time, USD is
the only currency available when ticket capture is activated.
When TICKET is selected, a currency is activated, as well, indicating both
documents can be processed simultaneously at a top speed of 1,200 pieces per
minute. To process USD notes at 1,600 pieces per minute, unselect TICKET.
The CLEAR key appears when the following SETUP
settings are active for SBAT ENABLE: ON and CLEAR.
Press to clear the active sub-batch total from the batch total, strap count and day
total when a sub-batch is suspected of being incorrect.
Press to change the batch total and sub-batch total on the main screen to piece
counts.
When the serial-number capture option is enabled in SETUP:
• The S/N key replaces the UNIT key on the main screen.
• The UNIT key moves to the MAIN SUB-MENU.
Press to quickly disable serial-number capture and process notes at higher
speeds.
When the serial-number capture option is enabled in SETUP:
• The S/N key replaces the UNIT key on the main screen.
• The UNIT key moves to the MAIN SUB-MENU.
Press to prompt the STRAP-SETTINGS
counts are cleared.
Press to start the motor. If the machine is set up for auto-start, the motor starts
automatically when it detects documents in the hopper.
JetScan iFX ® i100 Scanner
Description
screen, where strap limits are set and strap
All Models