Document Capture: Storage Setup - CUMMINS ALLISON JetScan iFX i100 Operating Instructions Manual

Document Capture: Storage Setup

The DOCUMENT CAPTURE buttons are only available on machines with imaging
options activated (serial-number, check or ticket capture).
These settings determine which document values are collected for reports and
file exporting.
Pressing STORAGE SETUP at DOCUMENT CAPTURE on SETUP MAIN MENU 3 prompts
one of the following screens, depending on the active option.
These screens are used to enable the following imaging options:
• Serial-number capture for all or select denominations.
• Check capture for MICR characters.
• Ticket capture for bar-code characters.
Denominations and document types are itemized in the DOC TYPE column.
The CAPTURE DATA column indicates whether an imaging option is active for a denomination
or document type.
To activate serial-number, check or ticket capture:
1. Press  or  to move the cursor in the CAPTURE DATA column. Stop on the desired field.
2. Press ON or OFF to enable or disable the option.
3. Repeat the previous steps as needed.
If EXIT is pressed before SAVE, the CONTINUE AND ABANDON CHANGES screen
appears.
Press NO to prompt the active DOCUMENT DATA STORAGE screen and retain
changes by pressing SAVE. Press YES to cancel changes and return to SETUP MAIN
MENU 3.
4. Press SAVE to retain settings.
5. Press EXIT to return to SETUP MAIN MENU 3.
© 2013 Cummins-Allison Corp.
73