The Add Key And Sub-Batches; Facing Documents - CUMMINS ALLISON JetScan iFX i100 Operating Instructions Manual

The ADD Key and Sub-Batches

A sub-batch is a deposit processed from one or several sources and treated as sub-groups within
a batch. This memory level tracks documents within a sub-batch.
To accumulate sub-batches, ensure SBAT ENABLE is ON in SETUP and ADD is selected on
the main screen.
To end the batch when processing is complete, remove documents from the pocket and press
END twice: once to end the sub-batch and once to end the batch.
An example of a SORT mode main screen is shown below. The ADD key is ON, and SBAT
ENABLE is ON in SETUP.

Facing Documents

To face documents, select SORT and FACE on the MODE-SELECTION screen. Make certain
the bottom document in the stack is faced in the direction desired for all documents. The
machine uses the bottom document as a reference and stops on all documents faced in the
opposite direction.
Place documents in the hopper. The machine begins processing. It stops each time it finds a
document that is faced improperly, and the screen reads "FACING ERROR DETECTED." To
resume processing, do one of the following:
Properly face the top document in the pocket and press ACCEPT. The document is
•
added to the total.
Properly face the top document in the pocket, return it to the hopper, and press REJECT.
•
The document is not added to the total.
© 2013 Cummins-Allison Corp.
49